When you're choosing between signaling indicators and operator controls for your panel, the decision starts with what the component needs to communicate. Do you need a cluster of lights to show which mode or condition is active, or do you need a big red button that stops the machine fast? These two controls answer different questions.
Quick Verdict
If your priority is clear machine status communication-showing manual or auto mode, warnings, or multiple machine conditions in one place-the AB Allen Bradley 800T-PC416 indicator light cluster is the piece to build around. It has red, blue, green, and clear lights, and it's priced at $65.
If your priority is a compact, cost-effective way to stop equipment quickly, the $17.50 emergency stop push button does that job. It's a latching e-stop with a 40mm red mushroom head.
Comparison
| Feature | Allen-Bradley 800T-PC416 | Emergency Stop Push Button |
|---|---|---|
| Price | USD 65.00 | USD 17.50 |
| Primary function | Four-lamp indicator cluster | Emergency stop switch |
| Operation | Lights show mode/condition | Push-twist latching |
| Contacts | Indicator lights only | 2 normally closed, 10A, 660V |
| Mounting details | Includes mounting nut, spacers, barrel nut | 22mm mount hole; max panel thickness 6mm |
| Condition | New - open box | New |
Where Each Product Wins
The Allen-Bradley 800T-PC416 wins when you need status visibility. The indicator options let you assign different colors to different modes or warnings, which is a clear advantage for panels that need to communicate machine state at a glance.
The emergency stop button wins when you need an immediate, no-nonsense shutoff. The push-twist latching action holds until you reset it, and the switch is built for industrial control circuits.
Product Notes
Allen-Bradley 800T-PC416 Indicator Lights
This indicator light cluster is designed for 120V control panels, with red, blue, green, and clear lights to indicate mode selections, warnings, or machine conditions. Each lit bulb draws 9.2W continuously, and the assembly includes three rubber spacers, a tightening mounting nut, and a decorative barrel nut. The main reason to choose it is the quad indication capability in a single component. The limitation is the condition: it's new but open box, sold as is without the original packaging. If you need retail-ready packaging for a client handoff, this won't deliver that. For a panel builder focused on function, the bundled mounting hardware keeps the build clean and reduces extra parts ordering.
Emergency Stop Push Button Switch
This emergency stop button gives you a latching push-twist operation: press the red mushroom head to stop, twist to reset. The 22mm mounting hole fits standard industrial panels, and the button diameter is 40mm. It has two normally closed contacts rated at 10A and 660V, with screw terminals for wiring. The reason to choose it is the all-in-one e-stop function at a very reasonable price. The limitation is that it only stops-it provides no status indication, and the panel thickness is limited to about 6mm maximum. If your enclosure wall is thicker, you'll need to plan for that. For a no-frills emergency stop, it gets the job done.
Final Choice by Use Case
For a machine build that needs to communicate mode or condition, the Allen-Bradley 800T-PC416 is the component to reach for. It gives you a complete status display.
For a retrofit or low-cost panel where the goal is to stop equipment quickly, the emergency stop push button is the straightforward pick. It stops fast and resets with a twist.
If your application needs both, keep them together: the e-stop handles the shutoff, the indicator cluster handles the status display, and each one does the job it's designed for.
