Choosing a control panel enclosure for a DIN rail layout usually comes down to one question: do you need a complete, prewired control panel or a blank box you can wire yourself? The four options here answer that in different ways, from a fully populated ABB contactor panel at the top of the price range to a small SCE enclosure at the bottom, with an IEC enclosure and an Eaton panel in between.
Quick take
- Need a functional boiler or process panel? The ABB contactor cabinet is the most complete option in this group.
- Want a ready-made panel that has not been installed? The Eaton Champion fits that role and costs less than the ABB.
- Building your own controls? The SCE metal enclosure is a low-cost starting point.
- Need an enclosure with more room? The IEC box gives you the most interior space.
Price comparison
The price spread runs from $26.87 to $500, and the bar below shows how the four panels line up.
| Product | Price | Price bar | Best use |
|---|---|---|---|
| Industrial Control Panel - ABB DP60C3P-1 Contactors - 208V 3-Phase - Steam Boil | USD 500.00 | Fully wired contactor panel for boiler/process use | |
| SCE Industrial Control Panel Enclosure 8N806LP 8" x 8" x 6" Nema-1 | USD 26.87 | Budget metal enclosure for a small control build | |
| Industrial Control Panel Enclosure Stainless Steel IEC 24x20x11" (6) Available | USD 130.00 | Enclosure for tougher environments | |
| EATON CHAMPION ENCLOSED INDUSTRIAL CONTROL PANEL - TEN004671 - BRAND NEW | USD 324.95 | Complete industrial panel for manufacturing or automation |
Decision matrix
| If you need... | Pick... |
|---|---|
| A control cabinet already set up for boiler or process controls | ABB DP60C3P-1 panel |
| A ready-made panel for industrial applications | Eaton Champion TEN004671 |
| A small metal enclosure for wiring your own controls | SCE 8N806LP |
| A larger enclosure with more interior space | IEC enclosure |
Product notes
Industrial Control Panel - ABB DP60C3P-1 Contactors - 208V 3-Phase - Steam Boil
This used cabinet came out of a 72 kW electric steam boiler system and keeps the ABB DP60C3P-1 definite-purpose contactors, control transformer, relays, terminal blocks, and wiring harness in place. For someone repairing a boiler or building a process control cabinet, the clean wiring and included components make it a near turnkey starting point. The trade-off is that it is a used unit and the highest-priced product in this group, so you are paying for the populated components rather than a fresh enclosure. If you need a complete 208V 3-phase contactor assembly, this is the most finished option, but if you only need a bare box, you would be paying for hardware you may not use.
SCE Industrial Control Panel Enclosure 8N806LP 8" x 8" x 6" Nema-1
The SCE enclosure is the low-cost way into a control panel project. It is a square metal NEMA 1 enclosure with panel-mount style, and some units have plastic hinges while others have metal hinges. At $26.87, it is the cheapest product in this comparison, which makes it sensible if you need a spare enclosure for a small control build or want to test a DIN rail layout without spending much. The limitation is size: the 8" x 8" x 6" interior is tight, and the used condition means minor scrapes should be expected. If your wiring plan needs more depth, one of the larger enclosures will save you frustration later.
Industrial Control Panel Enclosure Stainless Steel IEC 24x20x11" (6) Available
The IEC stainless-steel enclosure is the one to pick when the environment is harder on standard metal boxes. It is new, silver, rectangular, and rated IP66, with a stainless-steel finish and dual quarter-turn latches. The 24" x 20" x 11" dimensions give substantially more room than the SCE box, so a DIN rail assembly with more components can breathe. The catch is that it comes with studs but no backplates, so you will need to supply or fabricate your own mounting plate. At $130, it sits in the middle of the price spread, but the IP66 rating and stainless-steel body are what justify the step up from a basic painted enclosure.
EATON CHAMPION ENCLOSED INDUSTRIAL CONTROL PANEL - TEN004671 - BRAND NEW
The Eaton Champion is the factory-assembled option in this group. It is a heavy-duty enclosed industrial control panel with pre-assembled control components, aimed at manufacturing, OEM, facility maintenance, and automation systems. The brand-new condition is the standout reason to choose it over the used ABB cabinet, and the price is lower than the ABB panel, so you get a fresh unit without reaching the top of the range. The trade-off is that at $324.95 it costs more than the two enclosures, so it only makes sense if you actually need a ready-made control panel rather than a blank box. If a fresh, unused panel matters more than saving money on a shell, this is the one.
Final recommendation
Choose the ABB DP60C3P-1 panel if you need a populated contactor and relay assembly with the wiring already in place. Choose the Eaton Champion TEN004671 if you want a ready-made panel and prefer an unused unit. Choose the SCE 8N806LP if your priority is the lowest-cost enclosure and you plan to wire a compact control layout yourself. Choose the IEC enclosure if you need more space and a stainless-steel body, and you are able to add your own backplate.
