When you're choosing between two industrial HMI panels for your PLC and HMI control setup, the decision usually comes down to a mix of price, condition, and how well the screen fits the rest of your automation gear. The Danfoss DM1000 and the Allen Bradley PanelView Plus 7 come at this from very different angles. One is an open-box display built around a specific controller platform. The other is a used touchscreen with visible cosmetic wear. Both have a place on a control panel, but the right one depends on what you value most.
Quick Verdict
If you want the display that costs less and you already work with a Danfoss DM1000 controller platform, choose the Danfoss DM1000. If you want a color touchscreen from Allen Bradley and cosmetic wear on the exterior is acceptable, the PanelView Plus 7 is the better fit.
Comparison at a Glance
| Compare | Danfoss DM1000 | Allen Bradley PanelView Plus 7 |
|---|---|---|
| Price | USD 700.00 | USD 799.99 |
| Condition | New - Open box | Used |
| Type | Display | Touch Panel |
| Model | DM1000T-0-1-0-0 | PanelView Plus 7 |
| MPN | 11223957 | 2711P-T12W21D8S |
Where Each Panel Wins
The Danfoss DM1000 wins on price. It is the lower-priced listing and comes in a new open-box condition, which gives it an edge for shoppers who want a functional display without paying extra. The Allen Bradley PanelView Plus 7 wins on display format. It is a touch panel, while the Danfoss is listed as a display. The Allen Bradley also lists a U.S. country of origin, which may be helpful if that matters for your procurement.
Danfoss DM1000 Display DM1000T-0-1-0-0
At USD 700.00, the Danfoss DM1000 is the less expensive option in this head-to-head. It is listed as a new open-box display that is fully functional, and the DM1000T-0-1-0-0 model is designed for the DM1000 controller platform. If you already have a DM1000-based control system, this screen is designed to pair with that platform directly. The main limitation is that the unit comes without accessories. You will need to source any required mounting or connection parts on your own, which adds a small amount of planning to your install. For a buyer who wants a straightforward display for a Danfoss system at a lower price, this is a practical choice.
Allen Bradley PanelView Plus 7 Ser B
At USD 799.99, the Allen Bradley PanelView Plus 7 Ser B is the more expensive pick, but it delivers a color touchscreen in a touch panel format. The model number 2711P-T12W21D8S gives you a specific PanelView Plus 7 unit, and the used condition is clearly outlined: the screen has visible scratches and scuffs, and the bezel shows cosmetic wear. That means you are getting a used panel with exterior signs of use. The color display is a real advantage if you need a richer operator interface, and the U.S. country of origin may be a plus. The trade-off is that you have to accept the surface wear. If you can live with that, the PanelView Plus 7 is a solid touchscreen choice.
Final Choice by Use Case
Choose the Danfoss DM1000 when your priority is price and you are working in a DM1000 controller environment. Choose the Allen Bradley PanelView Plus 7 when you need a touchscreen interface and you are okay with a used unit that shows cosmetic wear. For a fresh install where included accessories matter, remember that the Danfoss comes without accessories, so factor that into your overall cost before you decide.
