When a contactor fails, you can't just grab any replacement. Mismatch the coil voltage, undersize the current rating, or ignore your panel's mounting layout, and the repair won't hold up. In the relays, contactors, and industrial switches aisle, two new units illustrate the range: the HIATSU Motor Contactor, an HVAC replacement at $13.68, and the Sprecher + Schuh CA7-85-10-220W, an industrial motor contactor at $289.99. The price gap is large because the jobs are different. Before you choose, confirm the coil voltage and the load your motor draws.
Quick verdict: Choose the HIATSU for a direct air-conditioner contactor swap. Choose the Sprecher + Schuh for a motor control panel that needs an industrial contactor.
| HIATSU 2-Pole HVAC Contactor | Sprecher + Schuh CA7-85-10-220W | |
|---|---|---|
| Listed price | USD 13.68 | USD 289.99 |
| Coil voltage | 120V AC | 200-220V AC |
| Load duty | 30A, 2-pole HVAC | 3-phase motor up to 60 HP @ 460V |
| Construction | Copper, CE/RoHS certified | Side-mounted 1 N.O. auxiliary contact |
| Application focus | Air-conditioning replacement | IEC contactor applications |
Where each product wins
- The HIATSU wins when the job is a simple HVAC contactor swap and you want a certified part without spending more than the repair calls for.
- The Sprecher + Schuh wins when the job is a heavy motor control panel and you need an industrial contactor with flexible mounting options.
HIATSU HVAC Contactor
You get one contactor ready to install. The 2-pole design gives you dual-circuit control, and the copper construction combined with CE and RoHS certification makes it a practical replacement for air-conditioning equipment. Quick-connect terminals help a service technician swap the part and get the system running again without extra wiring work. The limitation is the duty: this is an air-conditioning contactor, not a general-purpose industrial motor starter. If your load is a large motor, you need a larger class of component. For a direct HVAC replacement, though, it is the straightforward choice and it ships with what you need.
Sprecher + Schuh Motor Contactor
This is an industrial contactor for motor control, not a small HVAC part. It is rated for 3-phase motor loads up to 60 HP at 460V, includes a side-mounted 1 N.O. auxiliary contact, and can be base mounted or snapped onto a 35mm DIN rail. Those features make it easy to integrate into a panel with other IEC components. The limitation is cost: it carries the higher listed price in this comparison, so it makes sense only when the application actually needs that capacity. If you are wiring a dedicated motor starter or upgrading an industrial control panel, the additional price is justified by the horsepower range and mounting flexibility. If your job is a simple residential air-conditioner repair, the Sprecher + Schuh is more than the situation requires.
Final choice by use case
If you are replacing an air-conditioning contactor that matches the HIATSU's 30A, 120V, 2-pole specification, buy the HIATSU. It performs the same basic switching function. If you are building a motor control panel and the circuit uses a 200-220V coil, buy the Sprecher + Schuh. That is the component designed for that heavier class of work.
