When you're working in the sensors encoders machine safety space, you're often choosing between a manual input component and a sensing module. The One 5PIN EC11 30 Position Rotary Encoder With Push Switch Split Shaft and the C0401196 Industrial Motion & Position Sensors 10K Ohm Resistive & Optical sit at opposite ends of that decision. Their listed prices make the difference clear: USD 21.00 for the encoder and USD 39.99 for the sensor. Both are new parts, but their capabilities barely overlap.
Quick verdict
If your control panel needs a stepped rotary control, the EC11 is the practical choice. If you need a full motion and position sensing module, the C0401196 is the part to choose.
| Product | Price | Price bar | Core strength |
|---|---|---|---|
| C0401196 Industrial Motion & Position Sensors | USD 39.99 | App-controlled sensing | |
| One 5PIN EC11 30 Position Rotary Encoder With Push Switch Split Shaft | USD 21.00 | Rotary input with push switch |
The price difference is partly explained by the role each part plays. The C0401196 is a sensing component, while the EC11 is a manual input device. If your project only needs a human operator to change settings, the encoder is enough. If the system has to measure and report position, the C0401196 is the better fit. The right choice depends on whether the control loop ends with a hand or a sensor.
Where each product wins
- Choose the C0401196 when the job is motion and position sensing rather than manual adjustment. Its sensing capability makes it a stronger fit for monitoring-driven machine-safety tasks.
- Choose the EC11 when you need a tactile rotary input for manual panel control. It is built for turning, clicking, and changing values one step at a time.
Product notes
Honeywell C0401196 Industrial Motion & Position Sensors
The C0401196 is the more capable sensing option when you need more than a manual knob. Its 10K Ohm resistive and optical sensing core gives you motion and position feedback, and the AC current rating under 1 A suits low-current industrial controls. The app-controlled operation adds a remote-adjustment layer that the EC11 cannot match. Choose it when your machine-safety setup needs to monitor position rather than just accept a human input. The trade-off is that its current type is AC and its rating stays under 1 A, so this is a low-current AC sensing part. With a blue finish and a higher price point, it is aimed at projects that need the broader sensing feature set.
One 5PIN EC11 30 Position Rotary Encoder With Push Switch Split Shaft
The EC11 is a manual-input part. The 30-position detent gives you a clear click for every step, and the push switch lets the same component act as a select button. It uses a 5-pin split shaft measuring 12.5mm. Choose it when you want a simple way to navigate menus, adjust settings, or select values with a rotary knob. The catch is that it is aimed at radio use, so the 12.5mm shaft and 5-pin layout are specific to that setup. It is a manual encoder, not an industrial position sensor, so it will not provide remote monitoring on its own.
Final choice by use case
Choose the Honeywell C0401196 if your project needs industrial motion and position sensing. Choose the EC11 if you need a tactile rotary encoder for manual adjustment. Both are new parts, but they solve different problems: one is a sensor, the other is an input device. Take a few minutes to think about who or what will be doing the adjustment-if it's a person, the EC11 is the right fit; if it's a control system, the C0401196 gives you the sensing input you need. Evaluate the role first, then the price.
