When a control cabinet needs a time-delay relay, a solid-state relay, or a whole board of relay outputs, the first question is not always the brand. It is the condition and the price. In this corner of industrial switching, the options range from a spare SSR to a 12-relay PCB, with used and for-parts boards in between. This guide compares four distinct options so you can match the right piece to the right repair or build.
Quick take
- For a timing function: the USED AGASTAT E7012PC002 is the direct electropneumatic time-delay candidate.
- For a repair bench: the AMS 4419 Rev G is the for-parts control relay PCB.
- For a spare SSR: the INDUSTRIAL SPARE SSR-40DA is the new open-box low-cost pick.
- For a multi-relay layout: the 0907 PB offers the most relay outputs in this set.
Listed price comparison
The bars below show where each price sits in this group's range.
| Product | Listed Price | Price Bar |
|---|---|---|
| USED AGASTAT INDUSTRIAL ELECTROPNEUMATIC TIME DELAY RELAY E7012PC002 | USD 226.00 | |
| AMS 4419 Rev G Industrial Control Relay PCB CN8-A 82350 V1.06 | USD 79.00 | |
| INDUSTRIAL SPARE SSR-40DA RELAY 24/480V NSNP | USD 8.00 | |
| 0907 PB 12-RELAY INDUSTRIAL PCB BOARD | USD 350.00 |
Decision matrix
- Timing function: If the job needs an electropneumatic delay, the AGASTAT relay is the one that was made for it.
- Repair or salvage: If you can troubleshoot, the AMS PCB is the for-parts route into a specific board layout.
- Spare relay: If you just want a solid-state spare to have on hand, the SSR-40DA is the open-box component with the smallest cash outlay.
- Multi-output board: If you need several switched outputs, the 0907 PB packs the most relay capacity.
Product notes
USED AGASTAT INDUSTRIAL ELECTROPNEUMATIC TIME DELAY RELAY E7012PC002
At USD 226.00, the AGASTAT is the only electropneumatic time-delay relay in this set. It carries the E7012PC002 part number, which makes it easy to identify when you are matching existing panel hardware. The condition is used, so this is not a fresh factory item; it belongs in a repair or replacement scenario where a previously installed relay is acceptable. If the timing function you need is electropneumatic, this is the most direct match in the group.
AMS 4419 Rev G Industrial Control Relay PCB CN8-A 82350 V1.06
The AMS 4419 Rev G board is priced at USD 79.00 and brings the CN8-A 82350 V1.06 layout to the table. It is offered for parts or not working, which is the honest description of its condition. The advantage is cost and specificity: you get into a particular industrial control relay PCB without paying for a full new assembly. The limitation is the condition itself, because it has not been powered on, so any use starts with diagnostics. It is a reasonable choice for component recovery or a repair project.
INDUSTRIAL SPARE SSR-40DA RELAY 24/480V NSNP
At USD 8.00, the SSR-40DA is the least expensive relay in this comparison. It is new open-box, rated at 24/480V, and positioned as industrial spare stock. That makes it a low-cost spare to keep for a solid-state switching replacement. The limitation is that it is a single relay rather than a multi-channel board; you get one switching channel, so you need the surrounding control circuit already sorted. If you just need a spare SSR at a low entry price, this is the one.
0907 PB 12-RELAY INDUSTRIAL PCB BOARD
The 0907 PB is the highest-priced board here at USD 350.00, and its defining feature is the 12 relay ports on a single industrial PCB. That makes it a strong option when a panel has many loads to switch. It is new open-box and carries the model number 0907 PB. The trade-off is more than the upfront price: import duties, taxes, and customs charges are not included in the item price, so the total cost can climb. It suits a project where consolidating relay wiring matters more than minimizing initial spend.
Final recommendation by use case
- Timing replacement: Choose the USED AGASTAT E7012PC002 if you need an electropneumatic time-delay relay and can accept a used component.
- Repair/salvage project: Choose the AMS 4419 Rev G if you want a specific industrial control relay PCB at a lower entry point and are ready for diagnostic work.
- Spare SSR: Choose the INDUSTRIAL SPARE SSR-40DA if you want the smallest cash outlay and already have the circuit in place.
- Multi-output panel: Choose the 0907 PB if you need several relay outputs on one board and can absorb the higher cost plus potential import charges.
Match the condition to your workflow. The new open-box options are the SSR-40DA and the 0907 PB. The used AGASTAT and the for-parts AMS board are better suited to maintenance and repair situations.
