Choosing the right relay for your relays, contactors, and industrial switches setup usually comes down to what function the circuit actually needs. This head-to-head puts two very different relays side by side: a low-cost open-box AC relay and a specialized used relay. One is a general-purpose spare; the other is a targeted replacement part. Here's how to decide.
Quick verdict
If you need a simple AC relay rated for 250V 6A and you want to keep spending to a minimum, the INDUSTRIAL SPARE AC250V6A RELAY NSNP is the obvious pick. If you need a replacement for the AGASTAT E7012PC002, the used AGASTAT is the one that matches.
At a glance
| Product | Listed Price | Condition | Key Detail |
|---|---|---|---|
| INDUSTRIAL SPARE AC250V6A RELAY NSNP | USD 15.00 | New - Open box | AC 250V 6A relay |
| USED AGASTAT INDUSTRIAL ELECTROPNEUMATIC TIME DELAY RELAY E7012PC002 | USD 226.00 | Used | Electropneumatic time delay relay, MPN E7012PC002 |
Where each product wins
- The INDUSTRIAL SPARE relay wins on price and condition. It's the lower-priced option, and it's new open-box rather than used.
- The AGASTAT wins on specificity. It carries the E7012PC002 part number, making it a concrete choice for a targeted replacement.
Product notes
INDUSTRIAL SPARE AC250V6A RELAY NSNP
At USD 15.00, this relay gives you a low-cost way to add a 250V 6A AC switching component to your spares. Because it's new open-box, you're working with an unused component while spending far less than the AGASTAT. If your control panel needs a straightforward relay for ordinary AC switching, this is the more economical route. The trade-off is that the title focuses on voltage and current ratings rather than a specific relay part number, so matching it to an existing schematic may take extra legwork. And if your system relies on timing, this is a simple AC relay, not a time delay device. Choose it when the application is basic switching and you want to keep the spend low.
USED AGASTAT INDUSTRIAL ELECTROPNEUMATIC TIME DELAY RELAY E7012PC002
The AGASTAT E7012PC002 commands USD 226.00, making it a more serious investment, but it's also a specific industrial control component with a known part number. The electropneumatic time delay design adds a timed switching function that a standard AC relay cannot provide, which can be essential for certain automated equipment. For someone replacing this exact relay in an existing system, having that part number matters more than paying extra for a used unit. The limitations are the price and condition. It costs considerably more than the Industrial Spare relay and is listed as used, so you should inspect the unit carefully before installation. This is the relay to pick when your machine's timing needs call for the E7012PC002.
Final choice by use case
- For basic AC 250V 6A switching: Choose the INDUSTRIAL SPARE AC250V6A RELAY NSNP.
- For an E7012PC002 relay replacement: Choose the USED AGASTAT INDUSTRIAL ELECTROPNEUMATIC TIME DELAY RELAY E7012PC002.
