Shopping for industrial control interfaces means choosing between two very different ways to get an HMI into your project. On one side is a low-cost development kit built around an Infineon XMC4500 and an OLED display. On the other is a complete package built around a ProFace PS5000 industrial PC and a PS5001 HMI. The decision isn't which is better overall; it's which matches the stage of your project.
Quick verdict
If your goal is to develop and evaluate HMI graphics on a low-cost, focused platform, the Infineon XMC4500 OLED Display Kit is the clear budget pick. If your goal is to install a functioning industrial PC with an operator interface and the supporting components in one go, the ProFace PS5000 IPC + PS5001 HMI package provides that integrated set.
| Option | Price | What you get |
|---|---|---|
| Infineon XMC4500 OLED Display Kit | USD 50.00 | XMC4500 interface kit with OLED display, listed as new |
| ProFace PS5000 IPC + PS5001 HMI + PwrSup | USD 2,499.95 | Industrial PC, HMI, power supply, SSD, mounting hardware, software/documentation kit |
Where the Infineon kit wins
The Infineon Technologies kit wins when the priority is low-cost experimentation. Its KIT_XMC4X_HMI_OLED_001 part number points to a specific evaluation setup for the XMC4500, and the OLED display gives you a small visual output to program against. For anyone learning HMI development without a big budget, this is a direct way to start writing code and seeing results on screen.
Where the ProFace package wins
The ProFace package wins on integration. It brings together an IPC, a companion HMI panel, a power supply, and even an SSD and mounting hardware, so the major building blocks are already gathered. The condition is listed as new without original box, and the system was only powered to take the photos and confirm operation. If you need a machine-ready operator interface station rather than a development board, this is the package that gets you closer to installation.
Product notes
Infineon Technologies Kit Interface XMC4500 OLED Display KIT_XMC4X_HMI_OLED_001
The Infineon Technologies kit combines an XMC4500 interface with an OLED display and is listed as new. At $50.00, it offers an inexpensive way to test HMI concepts on Infineon's XMC family. The kit comes as pictured and does not include additional parts or accessories, so you'll need to supply power, wiring, and any enclosure if your project goes beyond a bench prototype. Its strength is focus: you get a specific, compact display interface to develop against without paying for an entire industrial PC setup. The limitation is the same focus; it is not a ready-to-run operator station. For someone who wants to learn the XMC4500, validate OLED display behavior, or build a custom control interface from scratch, this is the logical starting point.
NEW! ProFace PS5000 IPC + PS5001 HMI + PwrSup, Programmed, Software, CAN, Etc
The ProFace package takes the opposite approach. Priced at $2,499.95, it bundles a PS5000 industrial PC, a PS5001 HMI, a power supply, SSD, mounting hardware, and a software and documentation kit into one group. The condition is described as new without original box, and the system was only powered to take the photos and confirm operation. The appeal is completeness: instead of sourcing each component separately, you receive the core computing and display unit with pre-installed software and supporting parts. The trade-off is the open-box condition, which matters if you prefer factory-sealed hardware. This package makes sense when you need an integrated industrial PC/HMI set for a control panel or machinery project, not a low-cost evaluation board.
Final choice by use case
For embedded development and OLED interface experiments, choose the Infineon XMC4500 OLED Display Kit. For a bundled industrial PC and HMI setup with power supply, storage, and software, choose the ProFace PS5000 package. The right answer depends on whether you need a small, low-cost canvas to build on or a complete operator interface package ready for integration into a machine.
