Choosing a machine vision camera for machine vision identification means balancing resolution, frame rate, connection type, and the condition you are willing to accept. The Basler acA2000-50gcNOIRCUT combines a 2.2MP global-shutter color CMOS sensor, 50 FPS, GigE, and a C-mount interface in a compact industrial body. The catch is explicit: this unit is for parts or not working and has not been powered on, connected, configured, or otherwise tested. That makes it a very different purchase from a new camera, and the real question is whether the risk fits your project.
Quick verdict
If your setup already uses C-mount lenses and GigE, and you are comfortable with a used, for-parts camera that you will need to evaluate yourself, the Basler acA2000-50gcNOIRCUT offers a specific set of specs at USD 369.99. If you need a camera that can be put into service immediately after arrival, the unpowered, untested condition is a serious limitation.
Who it suits
This is a plausible fit for a builder or integrator who has the surrounding components-lens, host, power, and cabling-and wants a compact color camera with a global shutter, 2048 x 1088 resolution, and 50 FPS for identification work. It also suits someone who wants the NOIRCUT configuration: this unit is identified as not using the standard IR-cut filter, so it belongs in a system designed around that choice.
What stands out
The central specs match common machine vision identification roles: a 2048 x 1088 sensor gives a 2.2MP image, the global shutter helps freeze motion, and the GigE interface is the connection type. The C-mount interface allows lens flexibility, and the color mode expands what you can inspect. The physical condition is also part of the decision: the unit shows scuffs, scratches, marks, and mounting wear from prior installation.
Meaningful trade-offs
The biggest trade-off is condition risk. This unit is for parts or not working, has not been powered on, connected, configured, or otherwise tested, and shows visible wear. You have to assume the camera could need repair or replacement. The NOIRCUT design is another trade-off: without the standard IR-cut filter, the camera is not set up for applications that depend on conventional IR-cut color behavior. Cosmetic wear is not a functional guarantee either way, but it does confirm the camera has had prior service life.
Product notes
#### Basler acA2000-50gcNOIRCUT 2.2MP 50 FPS GIGE Color Machine Vision Camera
The reason to choose this camera is the combination of 2.2MP, 50 FPS, global shutter, GigE, and C-mount in a color camera at USD 369.99, especially if you need the NOIRCUT configuration for a system that does not use the standard IR-cut filter. The limitation is the for-parts or not working designation, compounded by no power-on or configuration testing and visible wear including scuffs, scratches, and mounting wear.
Bottom line
The Basler acA2000-50gcNOIRCUT is a used camera with a specific set of specs for someone with a defined vision identification need and the ability to work around an untested unit. It is the right fit only if the for-parts status, physical wear, and NOIRCUT design all work for your project. If you need a ready-to-run camera for a production line or deadline-driven setup, this unit is not the right camera.
