Choosing between two machine vision identification setups starts with a question: is the camera the only missing piece, or do you also need the components around it? At one end, the KEYENCE MACHINE VISION CAMERA WITH LENS CA-HX200M W/F1.4/12MM is listed at USD 249.99. At the other, the Industrial Machine Vision Inspection System is listed at USD 1,175.00. The decision comes down to how much of the surrounding hardware you already have.
Quick verdict
Choose the KEYENCE camera with lens if the missing piece is the camera itself. Choose the Allied Vision system if you need the supporting components too.
At a glance
| Consideration | KEYENCE CA-HX200M | Allied Vision Stingray system |
|---|---|---|
| Listed price | USD 249.99 | USD 1,175.00 |
| Package focus | Camera with F1.4/12mm lens | Stingray F201B camera, Computar 55mm, CCS PD2-3012A control unit, Melles Griot X-Y linear stage |
| Condition | Used | Used |
| Best fit | Adding a camera to existing hardware | Building a broader inspection setup |
Where the KEYENCE wins
The KEYENCE option wins when your machine vision identification need is a camera-and-lens refresh rather than a system build. Its package is tightly scoped, which fits a buyer who already owns illumination, control, or motion hardware.
Where the Allied Vision system wins
The Allied Vision system wins when the supporting hardware is part of the requirement. It brings several components together as one package, which saves the legwork of sourcing each piece separately.
Product notes
KEYENCE MACHINE VISION CAMERA WITH LENS CA-HX200M W/F1.4/12MM
Reach for this unit when the camera and lens are the only blanks in your setup. The KEYENCE CA-HX200M comes with an F1.4/12mm lens, and the package is centered on that camera-and-lens combination. The limitation is that focus: buyers who also need a control unit or linear stage will be looking at a separate procurement effort before this camera can sit inside a complete machine vision identification workflow. For someone with existing peripherals, this is a clean way to add KEYENCE optics to the line. The purchase is explicitly a camera-and-lens package, so you can match it against your current hardware list before committing.
Industrial Machine Vision Inspection System
This is the option for an empty bench. The Allied Vision Stingray F201B sits at the heart of a package that also includes a Computar 55mm element, a CCS PD2-3012A 4-channel Digital Control Unit, and a Melles Griot X-Y Linear Stage. The trade-off is complexity: more components means more integration before the system can be relied on in a machine vision identification workflow. If you need those supporting pieces, this bundle removes the need to assemble the same set of components one by one. There is also the practical question of how the camera, lens, controller, and stage interact in your particular setup.
Final choice by use case
- Camera-only refresh: The KEYENCE CA-HX200M is the focused fit.
- Fresh inspection station: The Allied Vision system is the broader starting point.
- Integrator with existing peripherals: The KEYENCE camera leaves room to use what you already own.
- Buyer who wants components in one package: The Allied Vision system has the more complete bundle.
