Choosing a contactor in the relays contactors industrial switches space usually comes down to two questions: how many circuits must be switched, and how much current each circuit carries. The two 24V coil contactors here sit at opposite ends of that spectrum. The Packard Pr4013 is a compact single-pole contactor for basic 30-amp switching. The 4-pole 60A NC contactor is a multi-pole unit aimed at motor, lighting, and HVAC loads. The price gap between them is large enough that the right choice depends less on price alone and more on the job your panel needs to do.
Quick Verdict
If you need to switch one circuit with a 30-amp inductive load, the Packard Pr4013 is the straightforward pick. If you need four poles and a normally closed action for larger motor and lighting loads, the 4-pole NC contactor from Shopcorp is the more capable unit.
At a Glance
| Feature | Packard Pr4013 | 4-Pole 60A NC Contactor |
| Price | USD 27.59 | USD 99.95 |
| Coil voltage | 24V | 24V |
| Poles | 1 | 4 |
| Contact action | Single-pole contactor | Normally closed contactor |
| Best fit | 30-amp inductive loads | Motor, lighting, and HVAC loads |
Where Each Contactor Wins
Where the Packard Pr4013 wins
- It costs significantly less, making it the easier buy for single-circuit jobs.
- The 30-amp inductive / 40-amp resistive capacity handles many smaller switching tasks.
- Spade terminals and class B coil insulation make it simple to wire into existing control circuits.
- Listed as a replacement for Honeywell DP1030A5013, which simplifies retrofits.
Where the 4-pole NC contactor wins
- Four poles switch multiple circuits at once.
- DIN rail mounting with a 35mm rail fit makes panel installation cleaner.
- Silent coil with no humming, plus a power status indicator for at-a-glance monitoring.
Product Notes
Packard 1 Pole 30 Amp 24V Contactor Pr4013
The Packard Pr4013 is the lower-priced choice, and it fits neatly into simple control circuits where one pole is enough. It is rated for 30-amp inductive loads and 40-amp resistive loads, so it can handle smaller motors, lighting, and resistive heating. The included spade terminals make wiring straightforward, and the coil uses class B insulation. It is also listed as a replacement for Honeywell DP1030A5013. What holds it back is the single-pole limitation: if your application needs more than one switched circuit, you will need multiple contactors or a different unit. For a focused one-circuit job, this is the practical way to go.
4 Pole 60A NC Contactor 24V Coil IEC 400V for Motor & Lighting DIN Rail Mount
The 4-pole NC contactor is the heavy-duty option. It provides four normally closed poles, so a single coil can control several circuits at once, and the default-closed behavior is useful in applications that need the circuit closed until the coil is energized. It mounts on a 35mm DIN rail, includes a power status indicator, and is designed for motor and lighting loads. The coil is described as silent and energy-saving, with no humming, which is useful in quiet installations. The main drawback is the higher price; for a simple single-pole job, you would pay more for capability you do not use. Choose it when your panel needs multi-pole switching on a DIN rail.
Final Choice by Use Case
For a single 30-amp inductive circuit and a lower purchase price, choose the Packard Pr4013. For multi-pole motor and lighting switching, choose the 4-pole NC contactor.
