In the world of industrial power supplies and transformers, DIN rail mounted units are the workhorses of control panels. Two very different options sit on the table: the PULS ML50.102, a compact adjustable low-voltage supply, and the NDR-120-24, a fixed high-current unit. Both are new and mount on DIN rails, but they serve different parts of the control panel. Let's see which one belongs in your cabinet.
Quick Verdict
If your equipment runs on standard 24V controls and needs generous current, the NDR-120-24 is the lower-priced, higher-current pick. If you need a supply that you can tune to a lower voltage for sensitive instrumentation, the PULS ML50.102 gives you that adjustability in a space-saving design.
Comparison Table
| Feature | PULS ML50.102 | NDR-120-24 |
|---|---|---|
| Output voltage | Adjustable 12-15V DC | 24V DC |
| Output current | 4.2A | 5A |
| Price | USD 61.22 | USD 44.99 |
| Mounting | DIN rail | DIN rail |
| MPN | ML50.102 | NDR-120-24 |
Both supplies are built for industrial environments, but the choice really hinges on whether you need a fixed 24V rail or the ability to drop below that. In a typical cabinet, you'll find 24V sensors, relays, and logic circuits. For those, the NDR-120-24 is a direct fit. If you're working with analog signals or older equipment that runs on 12V or 15V, the PULS lets you trim the output without adding a separate DC-DC converter.
Where Each Product Wins
PULS ML50.102 wins when you need voltage flexibility. Its adjustable output lets you fine-tune to match sensitive equipment that doesn't run on standard 24V. It's also designed with space-saving in mind, which helps in crowded cabinets.
NDR-120-24 wins on price and current. It costs less than the PULS and provides a higher output current for typical control circuits.
Product Notes
PULS ML50.102 DIN Rail Power Supply 12-15V DC 4.2A 50W Industrial PSU
The PULS ML50.102 is a switched-mode power supply (SMPS) that accepts a wide range of applications, from factory automation to control panels. Its standout feature is the adjustable 12-15V DC output, which lets you set the voltage to the exact level your equipment needs. That's a rare capability in this price class and makes it useful for instrumentation or analog sensors where a standard fixed-voltage supply would be too high. The 4.2A output is enough for smaller loads, and the compact form factor helps you fit it into tight enclosures. It's new and carries the ML50.102 model number. The main limitation is the lower current rating compared to the NDR, along with the higher price. If your application needs only 12-15V and doesn't demand heavy current, this is a precise, capable choice.
5A Industrial DIN Rail Power Supply NDR-120-24 ouput 24 Volt 5 Amp 240 Watt NEW
The NDR-120-24 from MW is the more straightforward option for standard 24V systems. It provides a fixed 24V DC output at 5A, which matches the most common voltage in industrial control panels. It's the lower-priced unit and offers more output current than the PULS. The blue color is a handy visual cue, and the inrush current rating of 5A suggests it can handle initial surges. The practical limit is the fixed output - if you need a different voltage, you'd need an external converter. For standard control circuits, this is a solid, cost-effective choice.
Final Choice by Use Case
Choose the PULS ML50.102 if your gear needs a non-standard voltage in the low range, or if you want to dial in the exact voltage for sensitive electronics. It costs more, but the adjustability can save you from buying a separate converter.
Choose the NDR-120-24 if you're running standard control circuits and want the lower price and higher current. The savings can go toward other cabinet components.
