When you are wiring a touch screen into a PLC-driven machine, the first decision is usually whether the screen should match an existing controller platform or fit a target price. That is the exact fork in the road between the Siemens SIMATIC HMI KTP700 Touch Screen and the Schneider HMIS65 HMI Touch Screen.
Quick Verdict
The Siemens SIMATIC HMI KTP700 is the stronger pick when controller platform alignment matters most. The Schneider HMIS65 is the stronger pick when the lower listed price matters more. In this head-to-head, the price spread between the two is USD 266.90, and the two units split on controller platform and country of origin.
Comparison at a Glance
| Product | Listed Price | Price Bar | Controller Platform | Country of Origin |
|---|---|---|---|---|
| Siemens SIMATIC HMI KTP700 Touch Screen | USD 614.00 | S7/300 | Germany | |
| Schneider HMIS65 HMI Touch Screen | USD 347.10 | Automate | France |
Where Each Product Wins
- Siemens KTP700: Choose it when controller platform alignment matters more than the price spread. The SIMATIC HMI family name is paired with the S7/300 controller platform.
- Schneider HMIS65: Choose it when the lower listed price is your first filter. The HMIS65 model name is directly in the product title, and the controller platform is listed as Automate.
Product Notes
6AV2123-2GB03-0AX0 Siemens SIMATIC HMI KTP700 Touch Screen
This Siemens SIMATIC HMI KTP700 Touch Screen carries a listed price of USD 614.00 and a Controller Platform of S7/300. The Country of Origin is Germany. The KTP700 also shows a firmware revision of V02 20 and SSD as a supported drive type. If your controller environment is tied to the S7/300 platform, this touch screen is the more direct match in the pair. The concrete limitation is the price: at USD 614.00 it is the higher of the two, so it takes a larger portion of the purchase price before you add any other components. The price bar in the comparison table also shows that it sits at the heavier end of this head-to-head.
1PC New Schneider HMIS65 HMI Touch Screen #US
The Schneider HMIS65 HMI Touch Screen is priced at USD 347.10 and names the HMIS65 model directly in the product title. Its Controller Platform is Automate, and its Country of Origin is France. The lower listed price is the main reason to consider it in this head-to-head: the price bar is shorter than the Siemens unit, giving you a quick visual sense of the cost difference. The trade-off is the brand shown for the item: it is "industry" rather than Schneider, so the brand text does not reinforce the Schneider name in the product title. Also, the Controller Platform is Automate, so if you are specifically looking for the same platform direction as the Siemens unit, this screen points to Automate instead.
Final Choice by Use Case
- For a platform-first PLC setup: The Siemens SIMATIC HMI KTP700 Touch Screen is the more direct match.
- For a price-first PLC setup: The Schneider HMIS65 HMI Touch Screen is the lower-price pick.
If platform alignment wins, choose the Siemens KTP700. If the lower listed price wins, choose the Schneider HMIS65.
