Choosing a variable frequency drive for a three-phase motor often comes down to matching horsepower, current, and input voltage to the motor you already have. You also want controls that make it easy to set the speed range and provide a soft start and stop to reduce wear. In this head-to-head review, the two products are identical in title, price, and specifications, so the focus shifts to whether this specific VEVOR drive fits your machinery.
Quick Verdict
Both products are the same VEVOR VFD 2.2KW 10A 3HP at USD 79.90. There is no price difference between them. The meaningful check is whether your 3-phase motor is in the 3HP/10A range and your supply is AC 220-240V single phase at 50/60Hz. If yes, the drive's soft start/stop and programming panel offer the control you need.
Specifications at a Glance
| Feature | VEVOR VFD 2.2KW 10A 3HP |
|---|---|
| Listed price | USD 79.90 |
| Brand | VEVOR |
| Condition | New |
| Current | 10A |
| Horsepower | 3HP |
| Input frequency | 50/60Hz |
| Input voltage | AC 220-240V single phase |
| Model | AT1-2200X |
Where Each Product Wins
Since the two products share the same title, price, and identified attributes, neither has an edge over the other. Any decision between them comes down to the product's fit for your motor, not a difference between the two units.
VEVOR VFD 2.2KW 10A 3HP
This drive is built around wide-range variable frequency speed control, using accurate frequency and amplitude of the motor drive current to adjust speed. The operating instructions describe a simple sequence: press the programming key, use the up/down and shift keys to find a parameter, press function/save to enter, modify the value, save, and exit. That user-friendly panel, combined with a large cooling fan and stable operation design, makes it a practical option for soft start/stop and variable speed duties on a 3-phase motor. The concrete limitation is the specification envelope: it lists AC 220-240V single-phase input and a 3HP/10A rating. If your motor draws more than 10A or needs more than 3HP, or if your supply voltage is different, this drive would not match.
VEVOR VFD 2.2KW 10A 3HP
The second product carries the same VEVOR VFD name, the same listed price, and the same specifications, so the choice between the two is not about feature differences. What matters is whether this drive's listed input and output ratings align with your setup. The soft start/stop behavior, easy wiring, and energy-efficient operation described for the drive are the reasons to keep it on your shortlist when your motor fits the 3HP/2.2KW range. The same limitation applies: the drive is presented as a 220-240V single-phase input unit with 10A current and 3HP output, so it is not positioned for motors outside that current and power band. If those numbers match your machinery, this VFD gives you the control you need; if not, you would need a different rating.
Final Choice by Use Case
Choose the VEVOR VFD 2.2KW 10A 3HP when your 3-phase motor falls within the 3HP/10A range and your electrical supply is single-phase 220-240V at 50/60Hz. The two products are identical in price and specification, so your choice between them comes down to preference rather than performance. If your motor demands a different horsepower, current, or input voltage, neither unit will give you the match you need.
