Choosing a 24V coil contactor usually comes down to matching the pole count and current rating to the circuit. If you pick a 1-pole contactor when the circuit needs 2-pole switching, the replacement won't do the job. If you buy a 4-pole DIN-rail unit for a simple condenser swap, you're paying for capability you won't use. The four contactors below cover a wide range of jobs, from a straightforward 1-pole replacement to a 4-pole motor and lighting contactor.
Quick Take
- The 1 Pole 40 Amp 24 VAC Coil AC Contactor is the low-cost path to a 1-pole AC compressor or condenser replacement.
- The CGELE 2 Pole Air Conditioner Contactor is the only 2-pole option here.
- The Packard 1 Pole 30 Amp 24V Contactor Pr4013 cross-references to Honeywell DP1030A5013.
- The Shopcorp 4 Pole 60A NC Contactor 24V Coil IEC 400V is the option for motor, lighting, and HVAC switching when you need four poles.
Listed Price Comparison
| Product | Listed Price | Price Bar | Pole Count | Coil | Job Fit |
|---|---|---|---|---|---|
| Packard 1 Pole 30 Amp 24V Contactor Pr4013 | USD 27.59 | 1 | 24V | 1-pole replacement with Honeywell cross-reference | |
| 1 Pole 40 Amp 24 VAC Coil AC Contactor | USD 19.66 | 1 | 24VAC | Direct 1-pole condenser replacement | |
| CGELE 2 Pole Air Conditioner Contactor 30 Amp 24V Coil | USD 19.01 | 2 | 24VAC | 2-pole condenser and compressor switching | |
| Shopcorp 4 Pole 60A NC Contactor 24V Coil IEC 400V | USD 99.95 | 4 | 24V | 4-pole motor and lighting switching |
Decision Matrix
- Need a direct 1-pole swap in a condenser unit? The 1 Pole 40 Amp 24 VAC Coil AC Contactor is a replacement that requires no wiring or adapter changes.
- Need two poles and a lower price? The CGELE 2 Pole unit gives you the second pole at the lowest price in this group.
- Need a 1-pole contactor with a replacement reference? The Packard Pr4013 is listed as replacing Honeywell DP1030A5013 and uses spade terminals.
- Need four poles with panel mounting? The Shopcorp 4 Pole NC Contactor is designed for 35mm DIN rails and has a power status indicator.
Product Notes
Packard 1 Pole 30 Amp 24V Contactor Pr4013
One concrete reason to choose it is the cross-reference to Honeywell DP1030A5013, which makes it easier to confirm a replacement when that part is being swapped out. The contactor has a 30-amp full-load inductive rating, a 40-amp resistive rating, a 24V coil, and spade terminals. It is rated for devices up to 600 VAC and uses class B coil insulation. The limitation is that this is a 1-pole unit, so it is not suited to circuits that need two-pole switching. At USD 27.59, it also costs more than the other 1-pole contactor in this group.
1 Pole 40 Amp 24 VAC Coil AC Contactor
The reason this unit stands out is that it is a direct replacement for AC compressor and condenser unit contactors, with no wiring or adapter changes required. It is a 1-pole contactor rated 40A FLA with a 24VAC coil and 50/60Hz operation. The shell is flame-retardant, and the contacts and coil are copper. The limitation is that it remains a single-pole contactor, so it cannot cover the two-pole circuits that the CGELE handles. Its listed price of USD 19.66 puts it below the Packard 1-pole unit, but the pole count should drive your decision before the price does.
CGELE 2 Pole Air Conditioner Contactor 30 Amp 24V Coil
The clear reason to pick it is the combination of a second pole and the lowest listed price in this comparison at USD 19.01. The contactor is rated for 30A full-load current and 40A resistive load with a 24VAC coil, and it is compatible with devices up to 600 VAC. Construction includes a flame-retardant housing, silver alloy contacts, copper coil, and all-copper terminals. The base has fixing screw holes, and wiring can use spade terminals. The limitation is that its full-load rating is 30A, so it is not a high-amperage replacement for the 40A-rated single-pole option. It is the right tool for a 2-pole condenser/compressor job, not for a typical 1-pole swap.
Shopcorp 4 Pole 60A NC Contactor 24V Coil IEC 400V for Motor & Lighting DIN Rail Mount
The main reason to choose it is the 4-pole, normally closed design with DIN-rail mounting, which is unique in this group. The contactor works with 35mm DIN rails, has a power status indicator, and is designed for motor, lighting, and HVAC switching in AC-1 and AC-3 applications. Its 24V coil and IEC 400V rating make it a fit for control panels where multiple circuits need to be switched from one contactor. The limitation is the price: at USD 99.95, it carries the highest listed price in this group. If your circuit does not need four poles or DIN-rail mounting, that extra capability is not worth the jump from the 2-pole option.
Final Recommendation by Use Case
- For a direct 1-pole condenser replacement without rewiring, choose the 1 Pole 40 Amp 24 VAC Coil AC Contactor.
- For a 2-pole condenser/compressor contactor, choose the CGELE 2 Pole Air Conditioner Contactor.
- For a 1-pole part with a Honeywell cross-reference and spade terminals, choose the Packard Pr4013.
- For four-pole motor and lighting switching, choose the Shopcorp 4 Pole NC Contactor.
