Quick take
For a short, low-cost run, the LAPP OLFLEX section is the least expensive entry point. For a full-length reel with heavier conductors, the Belden 580479 gives you a large volume of cable in one purchase. The other Belden roll offers a long option with dry/wet ratings. The Keyence OP-87529 fits a different job: a new, single automation cable rather than a bulk reel.
Listed price comparison
| Product | Listed price | Price bar | What you get |
|---|---|---|---|
| NEW Belden-CH 580479 475Ft 14 AWG 12 Wire Industrial Control Cable | USD 1,199.99 | 475 ft, 14 AWG, 12-wire | |
| Belden 2AS-1801POS-B-B/R Industrial Control Cable 1120A 01010000 ROLL OF 482FT | USD 641.24 | 482 ft, 18 AWG, 600V TC / 150V NPLF / 90C dry-wet | |
| 1PC Keyence OP-87529 Industrial Control Cable New Expedited Shipping OP87529 | USD 190.00 | Single cable for automation platform | |
| LAPP OLFLEX INDUSTRIAL CONTROL CABLE H05VVC4V5-K 14AWG 600V 8 FEET | USD 10.99 | 8 ft, 14 AWG, 600V |
Decision matrix
- Short-run repair, test lead, or small panel: LAPP OLFLEX.
- Long run with heavier conductors: Belden 580479.
- Full roll with dry/wet ratings: Belden 1120A.
- Keyence automation replacement: Keyence OP-87529.
Product notes
NEW Belden-CH 580479 475Ft 14 AWG 12 Wire Industrial Control Cable
The top price here buys a 475-foot roll of 14 AWG cable with 12 wires, which is useful when you need a long run from a cabinet to a machine without piecing together shorter sections. It is marked new open-box, with no original box and possible shelfwear. For a control circuit that calls for 14 AWG conductors, this reel gives you a lot of cable in one purchase. The limitation is the $1,199.99 price and the simple fact that a 475-foot reel is far more than a short cabinet-to-machine jumper needs. If your run is only a few feet, you are paying for many times more cable than the job requires.
Belden 2AS-1801POS-B-B/R Industrial Control Cable 1120A 01010000 ROLL OF 482FT
The 482-foot roll at $641.24 is the middle long-run option between the $1,199.99 reel and the $190.00 single Keyence cable. It carries an 18 AWG conductor size, 600V TC rating, 150V NPLF rating, and 90C dry/wet spec, so it suits an application that needs those ratings. It is also marked new open-box. That combination makes it a sensible route if you want a full roll and the 18 AWG gauge matches your control scheme. The limitation is the lighter conductor size: 18 AWG is not a substitute for a heavier gauge when the circuit requires a larger wire. At 482 feet you are buying enough cable for a large job, which is good only if that length is actually needed.
1PC Keyence OP-87529 Industrial Control Cable New Expedited Shipping OP87529
The Keyence OP-87529 is a different kind of purchase from the bulk reels. It is a single cable, marked as new, and it is associated with the Controller Platform Automate and model OP-87529. That makes it the option to choose when you are looking for a Keyence-specific control cable rather than a general spool. At $190.00 it costs more than the short LAPP section but less than the two long Belden rolls. The trade-off is that it is a model-specific automation cable, so it's a better fit when you already know it belongs to a Keyence setup than when you simply need a generic long length of control wire.
LAPP OLFLEX INDUSTRIAL CONTROL CABLE H05VVC4V5-K 14AWG 600V 8 FEET
The LAPP OLFLEX is the least expensive option at $10.99, and its 8-foot length makes it a practical pickup for a small cabinet jumper or a short test connection. The title shows 600V, so it is suited to a 600V-class control circuit. The condition is used, which is the main reason to pause before putting it into a permanent install. It is a short, low-cost way to get a 600V control cable in hand, but if your job calls for a full run across a machine or down a production line, 8 feet will not get you there.
Final recommendation
- For a long run with heavier conductors: the Belden 580479 reel is the one to consider.
- For a full roll with dry/wet ratings: the Belden 1120A is the match.
- For a Keyence automation controller: the OP-87529 is the new, model-specific cable.
- For a short, low-cost control cable: the LAPP OLFLEX section is the practical choice.
