For anyone shopping VFDs, soft starters, and motor controls, the first fork in the road is simple: are you feeding a large three-phase motor from a single-phase wall outlet, or are you looking for a smaller drive to control a motor that already has the right supply? The two drives in this head-to-head sit on opposite sides of that fork.
Quick verdict
The 1-to-3 phase 7.5KW VFD is the pick when your motor needs the larger rating and you have a single-phase 220V supply. The Yaskawa V1000 is the pick when you want the lower-cost option and are not shopping for that power class. In short, buy the larger drive for phase conversion and higher output; buy the Yaskawa for a used drive that costs less.
At a glance
| Drive | Listed Price | Condition | Key Identity |
|---|---|---|---|
| 1 To 3 Phase 7.5KW 10HP 220V CNC Variable Frequency Drive Inverter VFD VSD | USD 119.34 | New | 7.5KW / 10HP, 220V, 1-to-3 phase |
| Yaskawa CIMR-VA2A0001BAA V1000 Variable Frequency Drive | USD 40.00 | Used | V1000 series VFD |
Where the 7.5KW VFD wins
- It is built to handle constant-torque loads like hard-starting air compressors and HVAC units, plus variable-torque loads such as pumps and fans.
- The specs include a 20A per-phase maximum and SPWM control mode.
- The dual terminal sets provide digital and analog control options, which makes wiring more flexible.
Where the Yaskawa V1000 wins
- It is the lower-price option in this head-to-head, which matters if you mainly need a VFD and want to keep the cost down.
- The CIMR-VA2A0001BAA model number gives you a specific variant to reference.
- The used condition is the trade-off for that price position.
Product notes
1 To 3 Phase 7.5KW 10HP 220V CNC Variable Frequency Drive Inverter VFD VSD
Buy this one when your motor load is at the 7.5KW / 10HP level and your supply is 220V single-phase or three-phase. The unit uses SPWM control and can handle constant-torque loads like hard-starting air compressors and HVAC units, as well as variable-torque loads such as pumps and fans. It has two sets of terminal functions with digital and analog control terminals, so you are not limited to a single basic wiring layout. The main limitation is the price: at USD 119.34, it sits at the top of this two-drive price spread. If your motor is much smaller, this 7.5KW unit is more capacity than you need, and the used Yaskawa becomes the more sensible buy.
Yaskawa CIMR-VA2A0001BAA V1000 Variable Frequency Drive
Choose this one when the budget matters most and you have a motor that fits within the V1000 series. At USD 40.00, it is the lower-cost option in this comparison, and the CIMR-VA2A0001BAA part number gives you a definite V1000 variant to look up. The condition is used, so the trade-off is a new-condition unit versus a used-condition unit. If your application lines up with the higher power rating of the other drive, that drive is the one with those specifications spelled out. For a project that does not need that much capacity, the Yaskawa leaves room in the budget for the rest of the setup.
Final choice by use case
Choose the 7.5KW 10HP 220V VFD when you need single-phase input to three-phase output for a motor in that horsepower class. Choose the Yaskawa V1000 when you need a lower-cost variable-frequency drive and your motor falls within the V1000 series. The used condition is the main thing to weigh.
