Compare industrial automation & electrical by use case, features, trade-offs, price, returns, and seller terms before you buy.
This used machine vision identification system pairs an Allied Vision Stingray F201B camera with a Computar 55mm lens, a CCS 4-channel control unit, and a Melles Griot X-Y linear stage for USD 1,175. It suits buyers who need controlled illumination for reflective-surface inspection.
A used Allen Bradley AB 100-C09*10 reversing motor starter with 120V coil and 1.6/5A overload relay is priced at $74.99. It's a compact, complete assembly for small reversing motor circuits, but the used condition requires careful inspection.
A practical look at the 4 Pole 60A NC Contactor with 24V coil, DIN rail mount, and silent operation-who it suits, what stands out, and the trade-offs to weigh before buying.
A used pair of calibration target boards with built-in ColorChecker and LED grid illumination offers a practical way to combine lens distortion correction and color reference for machine vision identification. See if it fits your setup for $180.
An open-box INDUSTRIAL SSR-40DA relay rated for 24/480V is available for $8.00. This review looks at what you get, who it's for, and the trade-offs of buying a spare in this condition.
Need a single PCB to handle multiple relay-controlled circuits in an industrial setup? This review weighs the 0907 PB 12-Relay Industrial PCB Board's 12-port design, open-box condition, and $350 price to help you decide.
A practical look at the Sprecher + Schuh CA7-85-10-220W contactor, covering its 220V coil, DIN rail and base mounting options, and whether it fits your 3-phase motor application at USD 289.99.
The Allen-Bradley 802T-NP oil tight limit switch is a specific replacement component priced at $140. This review covers who it fits, what the listing tells you, and the trade-offs to weigh before ordering.
Is the Candy Controls Adjustable Model C rotary switch the right motion control component for your industrial automation? This review looks at its adjustable rotary design, US-made build, and used-condition trade-off at USD 25.00.
A focused look at the HIATSU 2-Pole 30A 120V contactor for HVAC systems, covering who it fits, what stands out, and the trade-offs to weigh before buying.
We break down the Telemecanique XCKL102 limit switch body, a new old-stock industrial component with IP66 protection and 6kV rated impulse voltage, to help you decide if it fits your replacement or assembly needs.
A focused look at the Cutler-Hammer 10316 H89A Precision Limit Switch, a US-made component designed for precise, reliable limit control in industrial automation and control systems.
A focused look at the Struthers-Dunn 219XBX69P 115/125 VDC power relay: who it fits, what makes it stand out, and the trade-offs to weigh before spending $319.99.
A used Yaskawa V1000 variable frequency drive for $40 is tempting. Here's what the CIMR-VA2A0001BAA offers and the trade-offs of buying motor controls used.
Four used Cisco industrial networking fieldbus switches from $54.99 to $3,400: see which one fits your port, feature, and budget needs.
Compare the ProFace PS5000 IPC with PS5001 HMI bundle and the IDEC FC6A PLC & HMI starter kit side by side: price, condition, included software, I/O, and which use case each fits.
A complete Klockner Bartelt control cable assembly for $159.99 faces off with a 482-foot Belden 18 AWG industrial cable roll at $641.24. Here's how to choose.
The Automation Direct H2-ERM100 is the lower-priced, DirectLOGIC DL205-compatible Ethernet remote I/O module; the ODOT CN-8032 is the new Profinet IO option. Choose based on your controller's network protocol first, then budget.
We compare the Klockner Bartelt 500081-6 ($159.99, used) with the Keyence OP-87529 ($167.32, new) to help you choose a control cable that balances cost and compatibility.
At $80, this used Dell Embedded Box PC 5000 SFF offers a compact base for industrial edge or SCADA setups, but only if you can supply your own DDR4 memory and storage.
Finding more guides for you…