Compare industrial automation & electrical by use case, features, trade-offs, price, returns, and seller terms before you buy.
A used Datalogic FBC9080-N100 fieldbus converter and PROFINET gateway at $99.99. This review covers who it suits, what the listed details tell you, and the trade-off of buying used.
A practical look at the MOXA EDS-316 industrial Ethernet switch, including its USD 549.94 price, the new-condition build, and the trade-off to weigh for fieldbus network projects.
A practical look at the Schneider Electric LMHAE572C industrial motion control stepper motor, priced at USD 325.00, covering who it fits, what the open-box condition means, and the trade-offs to weigh before buying.
The DM556 stepper driver supports 1.4A to 5.6A output and 128 micro-step subdivision for NEMA 17, 23, and 34 motors. Here's who it's for, what stands out, and the trade-offs to weigh before buying.
The Phoenix Contact 1085255 FL SWITCH brings dependable Ethernet connectivity to industrial control networks, manufacturing plants, and process automation. Reviewing what it offers and who should consider it.
Two TB6600 stepper drivers for $16.99 sounds like a deal, but is it the right choice for your NEMA 17 or 23 setup? This review covers the 4A 9-42V specs, pulse/direction input, and who should reach for the 2-pack.
A practical look at the used Cisco IE-1000-8P2S-LM V03 8-port industrial Ethernet switch, covering what you get for USD 179.00, the reset caveats, and who it's best for.
A used Mitsubishi RV-6S-S41 industrial robot arm listed at $3,200. This review looks at the listing details, who it suits, and the trade-offs of buying a pre-owned arm without full integration support.
A close look at the Invertek OPT-2-ETHEG-IN Ethernet IP Fieldbus Gateway, a new-in-box PLC Ethernet module priced at USD 152.98, to help you decide if it fits your industrial setup.
This used Parker 6104 indexer drive and stepper motor bundle from a retired machine is listed at $300. It includes the Zeta Drive and Compumotor Zeta Motor plus a power cable.
Compare the $39.99 Honeywell C0401196 10K Ohm resistive sensor with the $249.61 RCH20D rotary encoder replacement to decide which one fits your machine safety setup.
The Hoffman A302408LP combines powder-coated steel, NEMA Type 12 protection, and a Phoenix terminal block already added. At $495, this unused open-box 30x24x8 enclosure suits industrial control builds that want a ready-to-wire panel without paying for an unopened-box price.
A close look at the used Cisco IE-3400-8P2S-A Rugged Series industrial Ethernet switch for industrial networking fieldbus environments, including its tested-working condition, missing power adapter, and USD 3,400.00 price.
A new-in-box Phoenix Contact 1085255 Industrial Ethernet Switch at USD 194.99, built for stable data transmission and resistance to vibration and electrical interference in factory automation and process control networks.
Choosing an industrial limit switch comes down to actuator style and electrical rating. This guide compares a roller-head switch, a precision switch, a basic snap-action block, and an industrial switch body to help you pick the right control component.
Choosing a variable-frequency drive for a 220V single-phase shop means balancing phase conversion, horsepower, and control features. This guide compares four VFDs from a $40 used Yaskawa V1000 to a $130 7.5 kW drive so you can match the right unit to your motor and budget.
The SMH 42 57 Stepper Motor Controller (XY-SMH) packs forward/reverse pulse control, power-off memory, and multiple motion profiles into a $18.69 single-axis module. It suits basic DC 6-36V stepper setups, though you'll need to plan for its single-axis scope.
If you're rebuilding a control cabinet's I/O layer, the $749 MOXA module lot gives you analog, RTD, digital input, relay output, and field power modules. If you just need clean, weather-resistant cable entries, the $11.94 25-pack cord grip kit covers PG7 through PG16.
Compare four industrial barcode scanners for machine vision identification, from the lowest-priced wired 1D Zebra to a new open-box Datalogic Matrix 320. Use the price table and use-case picks to choose.
Four 7.5KW/10HP 220V VFDs all offer single-phase input and three-phase output, but prices span $118.92 to $158.90. Here's how to choose based on price, frequency range, and extra specs.
Finding more guides for you…