Compare industrial automation & electrical by use case, features, trade-offs, price, returns, and seller terms before you buy.
Compare four used machine vision identification cameras from $45 to $225: a driver-dependent VRMagic/Tamron bundle, a Keyence with wiring and lens, an IDS lab-focused unit, and an 8.8 MP USB 3.0 Flea3.
Compare four DIN rail power supplies between $31.64 and $85, covering 24V and 36V outputs, new and used condition, and power levels from 120W to 480W.
Choose between a ready-to-use 20-toggle control panel, an identifier-specific industrial panel, a dimensioned SCE cabinet, and a Hammond enclosure with stated Type 4, 13, and 12 designations.
Choose between two 16-32A AC compressor kits, a single-phase 220V soft-start module with soft stop, and a 40HP three-phase starter by matching motor phase, voltage, load class, and listed price.
Choose among four AC contactors by starting with the coil voltage your control circuit uses, then narrowing by pole count and current rating. The listed choices span 24V, 110V, and 220V coils, with one-, two-, and three-pole configurations.
Choose the Dell for a Windows 11 mini desktop with 32GB RAM and 1TB SSD capacity; choose the fanless Qotom Q305 when serial connectivity, compact embedded use, and the lower listed price matter more.
The Staubli TX90 brings a six-axis, 100cm-reach, 6kg-payload specification at USD 2,999.99, while the 2018 Denso four-axis arm is USD 750.00 and classified for parts or not working. Choose based on configuration needs and project condition tolerance.
The 110VAC 3-color LED tower with buzzer lists at USD 31.56; the LUBAN 12V/24V DC Andon stack light with 90dB buzzer lists at USD 41.95. Compare these two signaling indicators for operator controls and pick the right machine signal.
Two used Cisco industrial Ethernet switches-the IE-1000-8P2S at $179 and the IE-3000-8TC at $250-compare on price, port setup, and rugged features. Find out which suits your industrial networking fieldbus.
Compare a 24"x9"x12" SCE industrial enclosure with a pre-wired 50A control panel that includes an hour meter and Hubbell plug. The right choice depends on whether you need a larger bare cabinet or a compact ready-to-wire unit.
Two 40A contactors with 24V coils differ by pole count and listed price: the 2-pole costs $19.99, the 1-pole costs $17.99. See which one fits your compressor or heat pump.
Compare the Mean Well EDR-120-24 120W DIN rail supply at $25 with the SDR-480-24 480W unit at $85. Find out which 24V power supply suits your control panel.
Choose between VEVOR's 3HP and 10HP VFDs by starting with the stated motor-control capacity and current rating. Both share AC 220-240V single-phase input and 50/60Hz input frequency, while the 3HP and 10HP ratings define the practical split.
Choose the 5PIN EC11 for its named split-shaft, single-unit configuration, or the Dual Axis Rotary Encoder for 15-pulse operation and 2/4/6/10-piece quantity options.
Choose Belden for the stated 482FT industrial cable roll and detailed electrical designation, or choose Keyence for the OP-87529 one-piece cable at the lower listed price.
Choose the 750W 2.39Nm motor-and-driver controller kit for a focused CNC motor setup, or choose the 4-axis 750W Mach3 kit when four-axis motion control is the central requirement.
See if the used Square D 8501 X080 industrial control relay suits your 120V AC panel. It packs 8 normally-closed contacts, an expandable 12-pole base, and 10A thermal rating for $27.99.
Need a relay or relay board for an industrial control setup? Compare a new 115/125 VDC power relay, a solid-state spare, an untested parts PCB, and a 12-relay industrial board priced from $8 to $350.
A used full-size robot arm and a new scale model serve completely different needs. This head-to-head helps you pick between the Staubli RX130-B and the UR 1:6 Robot Arm.
The Datalogic POWERSCAN PM9501 brings wireless scanning and long battery life to retail and industrial settings as a seller-refurbished unit at $59.98. See who it fits and what to watch for.
Finding more guides for you…