When you're wiring an industrial control panel, the I/O layer is where everything connects. You need modules that match your signals, your field devices, and your cabinet layout. If you're shopping for control cables, connectors, and I/O, two MOXA options sit at opposite ends of the price spectrum: a single open-box MOXA ioLogik E1242-T Ethernet Remote I/O Module and a used MOXA Industrial Remote I/O Module Lot. Here's how to decide which one fits your project.
Quick verdict
For a single Ethernet remote I/O point, the ioLogik E1242-T is the cleaner bet: it's new open-box condition with no used-part uncertainty. The lot is a different play-it packs modules and auxiliaries into one purchase, but you're buying used hardware that was working when removed and hasn't been tested since.
Comparison
Let's put the two side by side.
| Feature | MOXA ioLogik E1242-T | MOXA Industrial Remote I/O Module Lot |
|---|---|---|
| Price | USD 110.00 | USD 749.00 |
| Condition | New - Open box | Used |
| Included modules | 1 | 14 |
| Additional components | - | Phoenix Contact diode, Crydom relay, fuse holders |
| Best for | Single remote I/O node | Multi-channel cabinet build-out |
Where each product wins
The ioLogik E1242-T wins on price, condition, and simplicity. At $110, it's the low-cost way to add one Ethernet remote I/O module to a new or existing setup. It's new open-box, so you don't have to worry about wear or missing parts.
The lot wins on density, variety, and breadth. For $749, you get far more I/O coverage-analog output, RTD temperature input, digital inputs, relay outputs, and field power distribution-plus a diode module, a solid-state relay, and fuse holders. If you need to populate a whole cabinet, this is the shortcut.
Product notes
MOXA ioLogik E1242-T Ethernet Remote I/O Module 12-36VDC Open Box
The MOXA ioLogik E1242-T is a single Ethernet remote I/O module that accepts 12-36VDC. It's in new open-box condition, meaning the original box was discarded before the seller realized the item's value, but the module itself is new with no damage. The concrete reason to choose this one is peace of mind: you're getting fresh hardware for a low price, and it's ready to run. The limitation is scope. You get one module, not an assortment. If your panel needs multiple I/O types or channels, you'll need additional units, which quickly erases the upfront savings.
MOXA Industrial Remote I/O Module Lot
The MOXA Industrial Remote I/O Module Lot is a used collection of 14 modules: one analog output module, one RTD temperature input module, six digital input modules, four relay output modules, and two field power distributor modules. It also includes a Phoenix Contact QUINT-DIODE, a Crydom A2425 solid-state relay, and two Eaton fuse holders. These were removed from an industrial automation cabinet and were working at the time of removal, but they haven't been tested since. That's the trade-off: you get a lot of hardware, but you assume the risk of untested used parts. If you have the time to inspect, clean, and test each module, this lot can be a cost-effective way to stock a full cabinet. If not, the uncertainty may not be worth it.
Final choice by use case
Choose the MOXA ioLogik E1242-T if you need a single Ethernet remote I/O module and want new-condition hardware without the used-gear gamble. Choose the MOXA Industrial Remote I/O Module Lot if you're building out a full control cabinet, need a wide mix of I/O types, and can handle used equipment that was working when removed but is untested since.
