When you're choosing a control cable for an automated machine, the first question is usually about scope: do you need a long multi-conductor run or one point-to-point cable? That is exactly the fork between the Belden-CH 580479 and the Keyence OP-87529, two industrial control cables aimed at different jobs in the control cables, connectors, and I/O space.
Quick verdict
For a long fixed installation that needs substantial cabling, the Belden-CH 580479 is the cable to plan around. For a smaller job at a much lower price, the Keyence OP-87529 is the more direct choice. The right pick depends mostly on the distance you need to cover and the size of the run.
Price and feature snapshot
| Product | Price | Relative price | Condition | What stands out |
|---|---|---|---|---|
| Belden-CH 580479 | USD 1,199.99 | New - Open box | 475 ft, 14 AWG, 12-wire | |
| Keyence OP-87529 | USD 190.00 | New | Single cable; Automate controller platform |
Where each product wins
- Belden-CH 580479 wins when the job needs length and conductor count. It is the higher-priced option, but it covers a full run in one cable.
- Keyence OP-87529 wins for smaller jobs where the lower price matters most.
Product notes
Belden-CH 580479
The Belden-CH 580479 is a large quantity of cable: 475 feet of 14 AWG, 12-wire industrial control cable from a Belden-branded line, priced at $1,199.99. If your control cabinet layout calls for a long, permanent multi-conductor run, this is the product that gives you one continuous length to pull. Choose it when distance and conductor count matter more than portability. The trade-off is condition: it is new open-box, without the original box and possibly showing shelf wear. That is not a reason to avoid it, but it is a reason to inspect the cable before installation. With 475 feet of wire, this is a long-run solution rather than a small one-off cable.
Keyence OP-87529
The Keyence OP-87529 is a single new industrial control cable priced at $190.00. It carries the Keyence brand, the OP-87529 model designation, and is specified for the Automate controller platform, which makes it a cleaner fit when you are wiring a Keyence automation controller on that platform and do not need a full spool. Choose it when you want one cable that arrives in new condition and you want to keep the upfront cost low. The scope is different from the Belden-CH 580479: this is a single cable, not a long multi-wire run. If your installation spans a long distance, you'd be building the run from multiple cables rather than pulling one long run. For a compact point-to-point connection, the OP-87529 is the easier of the two to fit into a small parts budget.
Final choice by use case
If you are laying out a long fixed cable path and need a multi-wire run in one pull, the Belden-CH 580479 is the one to budget for. If you need a new control cable for a Keyence automation controller and want the lower-price entry point, the Keyence OP-87529 is the practical pick. Match the cable to the actual run length and controller platform, and you will get the right part without overbuying.
