When you're planning an industrial control wiring job, the key question is whether you need to run cable or terminate it. For a typical control cable and connector I/O setup, you have two different hardware pieces: a long reel of control cable and a connector receptacle. This comparison looks at the Belden 2AS-1801POS-B-B/R Industrial Control Cable and the Lapp Epic 10.1710 6-Contact Screw Terminated Industrial Connector Receptacle. Both belong in an industrial system, but they solve different problems.
Quick Verdict
If you're pulling new conductors over any distance, choose the Belden cable: a full roll of industrial control wire rated for demanding environments. If your cable is already in place and you need a termination point, the Lapp Epic receptacle offers a connector solution.
Comparison at a Glance
| Feature | Belden Control Cable | Lapp Epic Receptacle |
|---|---|---|
| Price | USD 641.24 | USD 50.00 |
| Condition | New - Open box | New |
| What you get | 482-ft roll of 18AWG control cable | 6-pin screw-terminated receptacle |
| Key specs | 600V TC, 150V NPLF, 90C dry/wet | Pin style, copper contacts, 6 pins |
| Best for | Long cable runs in industrial settings | Compact multi-pin connection points |
Where the Belden Cable Wins
The Belden cable wins when the job requires distance. The long roll lets you run a continuous conductor from a panel to field devices without splicing. Its multiple industrial ratings suit demanding locations. The main limitation is condition: it's new but open box, so the factory seal may be missing. And a bare cable still needs connectors or terminal blocks at each end.
Where the Lapp Epic Receptacle Wins
The Lapp Epic wins when you need a fixed connection point. Its design makes it easy to land wires with basic hand tools, and it provides a stable, industrial-grade interface in a compact package. The limitation: it's only the receptacle, so you'll need a matching plug and cable to complete the circuit.
Product Notes
Belden 2AS-1801POS-B-B/R Industrial Control Cable
At USD 641.24, the Belden cable is the higher-priced purchase. You're paying for a specific spec: 18AWG, 600V TC, 150V NPLF, 90C dry/wet, in a 482-foot roll. That length supports long runs across a plant. It's the right choice when you need continuous conductors without splicing. If you're pulling wire through cable tray or conduit, the continuous roll avoids splices, which is a reliability benefit. The trade-offs: the new open-box condition means packaging may not be sealed, and you'll need termination hardware because the cable doesn't come with connectors.
Lapp Epic 10.1710 6-Contact Screw Terminated Industrial Connector Receptacle
At USD 50.00, the Lapp Epic receptacle is the lower-priced item and is brand new. It has 6 pins, copper contacts, and a pin-style arrangement. Screw termination means you land wires with a screwdriver, not a crimper. That's handy for field installs and maintenance. It's a good fit for a machine junction box or a control panel interface where you want a secure, gender-specific connection. The copper contacts offer low resistance for signal integrity. The limitation is that it's a single receptacle: you still need a plug and cable for it to function.
Final Choice by Use Case
Choose the Belden cable when you're pulling new wire across a distance. Choose the Lapp Epic receptacle when the wire is already run and you need a durable 6-pin connection. In many industrial control projects, you'll eventually need both.
