When you're planning a run of control cables, connectors, and I/O wiring, the physical connector type matters just as much as the electrical spec. Do you need a single, robust multi-pin receptacle for a machine interface, or a bulk supply of conduit connectors for routing metal-clad cable into boxes? The Lapp Epic 10.1710 and the Arlington Industries 38AST lot are separated by just $2.26 in list price, but they solve two very different problems.
Quick Verdict
If you need one dependable multi-pin connection point, the Lapp Epic 10.1710 is the direct choice. If you need a large quantity of conduit connectors for multiple boxes, the Arlington Industries lot is the practical pick.
At a Glance
| Product | Price | Relative price | What you get | Distinguishing feature |
|---|---|---|---|---|
| Lapp Epic 10.1710 Receptacle | $50.00 | One screw-terminated receptacle with pin-style contacts | Copper contact material, 6-pin layout | |
| Arlington 38AST Snap2 Lot | $52.26 | 50 insulated-throat conduit connectors | Zinc die-cast body, tool-free snap-in design |
Where Each Wins
Choose the Lapp Epic for a fixed control or I/O application that needs a dedicated connection point. The receptacle's design suits a permanent interface where you want a single, reliable link. Choose the Arlington lot for rough-in work where you need many cable connections in a single install. The bulk pack keeps you stocked for a full day of box wiring.
Product Notes
Lapp Epic 10.1710 6-Contact Screw Terminated Industrial Connector Receptacle
The Lapp Epic 10.1710 is a single industrial receptacle built around a 6-pin configuration. The pin-style contacts are made from copper, which gives you a solid conductive path for control wiring. Screw termination means you can secure the wires without crimping or special tooling, which is handy for a fixed connection point. The Epic brand is positioned as a trusted option in industrial settings, so this receptacle is a good candidate for a machine interface or panel drop. The limitation is that you're getting exactly one piece. If your project spans multiple connection points, you'll need to buy additional receptacles, and that cost will climb. For a single, purpose-built multi-pin connection, though, the Lapp delivers the core feature set in one package.
Arlington Industries 38AST 3/8\" Snap2 IT Connector Lot of 50
If you're stocking up for a large cable install, the Arlington 38AST Snap2 IT Connector Lot of 50 starts with a strong advantage: 50 pieces in one box. Each die-cast connector has an insulated throat and is sized for 3/8\" fittings. It accepts cable ranges from .405 to .612 inches, including MC/HCF steel and aluminum cable and AC/HCF cable. The snap-in feature is the standout here: you push the cable into the fitting, snap the fitting into the box, and you're done without tools. If you need to remove cable, loosening the top screw releases it. The trade-off is that these are single-cable conduit connectors, not multi-pin receptacles. They won't give you a 6-pin interface for control signals. But for terminating many cable runs into boxes, this 50-pack is a practical, quantity-focused option.
Final Choice by Use Case
For a fixed control or I/O interface that needs one multi-pin connection point, the Lapp Epic 10.1710 is the right component. For a large install where you need many dependable conduit connections, the Arlington Industries lot is the more practical choice. Match the connector to the task: a dedicated receptacle for one interface, or a bulk supply for a full day of box wiring.
