Compare industrial automation & electrical by use case, features, trade-offs, price, returns, and seller terms before you buy.
Considering the Packard C130A definite purpose contactor? This review covers its 1-pole, 30-amp rating, 24V coil, and what it can handle in HVAC and motor control applications at USD 18.35.
Need a new control cable for your Keyence Automate setup? This single-product guide walks through the OP-87529's condition, platform fit, and trade-offs so you can decide before you order.
This 2-pole, 30-amp, 24 VAC coil contactor is priced at USD 22.99 and uses copper contacts and a flame-retardant shell. See if it fits your AC motor replacement job.
Four rotary encoder options from $21.00 to $249.61 show how price tracks form factor, resolution, and output type. Use the comparison table and decision matrix to pick an EC11 switch, an OMRON unit, a HONTKO unit, or an industrial RCH20D replacement.
Compare four industrial control panel enclosures priced from $50 to $113.99, from compact 8x6x4 options to 24-inch cabinets, and match each to your panel-mounting needs.
Four servo stepper motion control options at listed prices from a $32.49 hydraulic damper to a $1,480 Siemens amplifier, plus used and new alternatives with clear trade-offs.
Four industrial networking fieldbus gateway listings span USD 152.98 to USD 404.99, from a new Invertek Ethernet IP module to a used Delta Tau CAN/PROFIBUS card. See which one fits your protocol search, condition preference, and price range.
Compare four 24VDC DIN rail power supplies listed between $25.00 and $303.96, with output currents from 5A to 20A, and choose the right one for your control panel.
Compare four PLCs across price, condition, and platform: a new Schneider M221, a Mitsubishi FX3U, a Beckhoff module, and a tested used Omron NX102-9000.
From a $217.99 servo kit to a $699 used 1 kW motor, see how four servo stepper motion control options compare on price and setup.
Compare four used machine vision cameras for identification work: high-resolution color, monochrome autofocus, and lens-included bundles. Use the price breakdown and decision matrix to match a camera to your inspection, robotics, or imaging task.
Compare four used machine vision cameras by resolution, interface, frame rate, and listed price to match the right identification tool to your project.
Four control cable connectors for I/O and power wiring range from a $13.62 IP67 4-pin plug to a $120 10-pair waterproof kit. Compare listed prices and match each one to your job.
For operator-facing signal lights, compare four options: a compact green pilot light pack, a waterproof IP67 metal indicator, a multi-color 22mm panel set, and a 5-stack USB Andon tower with buzzer. Listed prices span $4.98 to $177.99.
Four DPDT industrial relays to compare, from a $12.90 plug-in power relay with socket to a $267.99 Struthers-Dunn 10A unit. Match coil voltage, contact rating, and terminal style to your control panel.
Compare four single-to-three-phase VFDs priced from $32.99 to $130.11. This guide covers power ratings, phase conversion, control modes, and which unit makes sense for different shop loads.
Choosing between a PanelView HMI trainer, a full Omron PLC/HMI kit, a MicroLogix 1000 module, and a Migro ladder-logic starter kit comes down to whether you need a complete training station or a compact controller. Prices range from $199.99 to $2,659.
Compare four industrial control transformers listed between $80 and $179.97. Find the model with the VA, voltage, and frequency features that match your application.
Compare four used industrial robot arms from Epson, Fanuc, and Staubli across price, reach, payload, and condition, then match each to your automation cell.
Need a variable frequency drive to run a 3-phase motor? Compare four 220V inverter converters at listed prices from USD 79.90 to USD 198.90, with horsepower, current, and input phase details.
Finding more guides for you…