Browse by everyday use case, then check fit, tradeoffs, and details worth confirming before you open a seller page.
Comparing the wired Zebra LI3608 and wireless Datalogic PM9501 for machine vision identification: this head-to-head weighs connection stability, condition, and cost to help you pick the right scanner.
Choosing between the Epson R12B120359 CV1 camera and the Keyence CA-CH3 cable? We compare price, condition, compatibility, and use case to help you pick the right part for your machine vision identification setup.
Two used machine vision cameras, one price difference of just over five dollars: get the quick verdict on the Cognex DataMan DM474QL-M and the Keyence CA-HX200M with lens.
Deciding between a used KEYENCE machine vision camera with lens and a pair of LED-illuminated distortion calibration boards? See which one fits your machine vision identification setup.
A used Cognex IS7802C-363-50 Color Machine Vision Camera with Opto TC23016 lens at USD 699.00. This guide weighs the used-condition trade-off and the included lens for machine vision identification.
A used Keyence CA-HX200M machine vision camera with F1.4/12mm lens at USD 249.99. This guide explains who it suits, what stands out, and the used-condition trade-off.
Compare four industrial barcode scanners across conditions and price points, from a $19.99 new Bluetooth handheld to an $810 open-box fixed Datalogic Matrix 320.
From a spare control board to a digital stereo viewer, these four machine vision identification options cover a wide price range. Use this guide to match the right system to your inspection workflow.
We compare a lower-priced scanner and a higher-priced scanner to help you choose the right barcode scanner for your machine vision identification needs.
The KEYENCE CA-HX200M comes in at $249.99, while the Cognex IS7802C-363-50 color camera is $699.00. Here's what that $449.01 spread means for your decision.
Comparing four machine vision identification barcode scanners-Datalogic POWERSCAN PM9501, Tera D5100, Datalogic Matrix 320, and Keyence SR-X300W-across condition, connectivity, and listed prices from $19.99 to $810 to help you pick the right reader for your workflow.
Compare four industrial barcode scanners at very different prices-from a $39.99 KUIIYER USB model to an $810 Datalogic Matrix 320-and find the right match for your machine vision identification setup.
Two used USB 3.0 C-mount cameras tackle machine vision identification differently: the Flea3 offers color at a lower price, while the Basler brings 20MP monochrome resolution. Match your imaging needs and budget.
Compare four machine vision identification options priced from $249.95 to $1,477.24: a parts-condition duct recorder, an open-box monitor system, a new high-speed sensor, and an Epson CV1 camera-then match them to your inspection job.
Compare four industrial barcode scanners across price, condition, and read capability-from a $19.99 wireless model to an $810 Datalogic Matrix 320.
Compare the Basler acA2000-50gcNOIRCUT (2.2MP, 50 FPS, GigE, color) with the Basler acA5472-17um (20MP, 17 fps, USB 3.0, mono) to decide which used camera fits your machine vision identification project.
A used Keyence camera with lens and a used Keyence 3M cable serve different roles in machine vision identification. The camera captures images; the cable connects an existing CA Series camera. Here is how to choose.
A used Point Grey/FLIR Flea3 FL3-U3-88S2C-C brings 8.8 MP resolution and 21 fps over USB 3.0, but you'll need to supply your own C-mount lens and locking cable.
A practical look at the Basler acA5472-17um 20MP monochrome USB 3.0 camera, covering resolution, frame rate, interface, and the trade-offs to weigh before adding it to your machine vision build.
A used Basler acA4096-11gm 8.9MP monochrome GigE camera with 13.1 fps, global shutter, and C-mount is offered for parts or not working at USD 399.99. Here is who should consider it.
The Roto-Vision i2Cam recorder with no camera head is listed for parts or not working at $249.95. It powers on but has a damaged cable, making it a repair candidate rather than a ready-to-run duct inspection system.
Compare four used machine vision cameras for identification work: high-resolution color, monochrome autofocus, and lens-included bundles. Use the price breakdown and decision matrix to match a camera to your inspection, robotics, or imaging task.
Compare four used machine vision cameras by resolution, interface, frame rate, and listed price to match the right identification tool to your project.
Two used industrial machine vision cameras, one IDS with lab-oriented specs and one Keyence that includes wiring and lens, sit at different price points for machine vision identification.
Compare a 20 MP USB 3.0 Basler ace U with an 8.9 MP GigE Basler ace L for machine vision identification. Both are used and C-mount, listed at $399.99 and $449.99; choose based on interface, resolution, and condition.
Looking for a barcode scanner that reads 1D, QR, and 2D codes at speeds up to 120 fps? The KUIIYER industrial scanner pairs USB plug-and-play with Bluetooth and a charging dock for around USD 39.99.
Compare four used machine vision identification cameras from $45 to $225: a driver-dependent VRMagic/Tamron bundle, a Keyence with wiring and lens, an IDS lab-focused unit, and an 8.8 MP USB 3.0 Flea3.
The Datalogic POWERSCAN PM9501 brings wireless scanning and long battery life to retail and industrial settings as a seller-refurbished unit at $59.98. See who it fits and what to watch for.
Used machine vision identification gear spanning $119 to $699 is compared here: a Keyence camera module, a Keyence camera with F1.4 lens, a Cognex color camera, and a calibration target board set. Match each to your inspection need.
Two Basler GIGE cameras for machine vision identification: one color 50 fps 2.2MP unit listed for parts, one mono 8.3MP 4K Ace 2 at 13 fps. Speed and color versus resolution and listed price.
The Basler acA2000-50gcNOIRCUT combines a 2.2MP global-shutter color sensor, 50 FPS, GigE, and C-mount, but this unit is for parts or not working and was not powered on or tested. It suits a buyer who can accept that risk.
Find the right machine vision identification scanner for your workflow with this price-and-feature comparison of four barcode readers, from a $19.99 wireless model to a $143.29 high-speed industrial reader.
A focused look at the Cognex Thorlabs Machine Vision Optical Camera Alignment Calibration & TV Lens kit, priced at USD 199.00. It bundles two fixed/prime C-mount lenses, manual focus, an f/1.4-2.1 aperture range, and a foam-lined Platt hard case for machine vision alignment and calibration tasks.
Choose between a wireless scanner with a charging stand, a USB-connected Motorola, a wireless Honeywell missing key battery pieces, and a Microscan marked for parts or not working.
Compare a used 8.9MP monochrome Basler listed for parts with a tested 5MP color FLIR. Prices, specs, and condition decide which GigE camera fits.
Compare two used Keyence machine vision cameras: the $49 XG-H500M with lens versus the $69 XG-035M CCD unit. Here's where each has the edge for identification work.
Alacrity's wireless 2D scanner with charging stand lists at USD 54.00; NETUM's rugged GY80U lists at USD 225.00. Compare DPM capability, IP67 protection, and connectivity to choose the right machine vision identification tool.
Two used Keyence machine vision cameras, one with wiring and lens, one from Japan with a specific model number. Compare their listed prices, included items, and condition cues to choose.
A used VRMagic VRmC-3+ camera bundles with a Tamron 4-12mm C-mount IR corrected zoom lens and bracket for USD 45.00, but this is not a plug-and-play webcam: you'll need driver installation and VRMagic software or API access.
Considering the Basler Ace 2 a2A3840-13gmBAS for machine vision identification? We break down the 8.3MP, 3840x2160, 13fps mono GigE camera at USD 329.99, from its C-mount and PoE support to the trade-offs of a used unit.
Compare four GigE machine vision cameras for identification: 5MP to 14MP, mono and color, from $169.99 to $329.99.
Compare four industrial machine vision cameras: two used Keyence XG-H500M modules, a Keyence XG-035M CCD unit, and a new-open-box Cognex DataMan sensor, with listed prices from $49 to $449.
From a $54 wireless 2D scanner to a $1,199 SICK image-based code reader, this guide helps you choose an industrial barcode scanner for machine vision identification by price, connectivity, and condition.
A used Basler Ace 2 monochrome camera at $329.99 brings 8.3MP 4K resolution and GigE PoE to machine vision identification, but you'll need to factor in the lack of lens, cable, and power supply.
Two used Keyence machine vision cameras, the XG-H500M and the XG-035M, present distinct trade-offs. We compare their listed prices, condition details, and which one fits different identification tasks.
Finding more guides for you…